Query returned 2007 results.
HUMANISING THE PRODUCT-SERVICE SYSTEM WITHIN A CIRCULAR ECONOMY FOR PRODUCT DESIGN AND ENGINEERING STUDENTS
Bailey, Stuart Graham // 2023
Designing for a circular economy introduces complex networks, collaborations, and relationships into the context of product design. Increasingly, the context within which young undergraduate and ...
Identifying and Comparing Subproblems in Factory Design Processes
Herrmann, Jeffrey W. (1);
Gralla, Erica (2);
Fazelpour, Mohammad (1) // 2023
When a design team faces the problem of designing a complex system, they are required to make several decisions. Because such design problems are difficult to solve all at once, teams often decompose ...
Identifying successful approaches during testing activities in engineering design
Liewerenz, Oliver;
Grauberger, Patric;
Nelius, Thomas;
Matthiesen, Sven // 2023
Testing activities to gain specific design knowledge play an essential role in engineering design, when a structure needs to be developed, for which knowledge from analytical models or documentation ...
Impact of the implementation of Design for Circular Economy features on the product development process
Merlin Stolzle, Daniel Roth, Matthias Kreimeyer // 2023
The transformation from a linear to a circular economy seems to be the right way to cope with rising resource consumption by a growing economy. One fundamental aspect to achieve this transition is ...
Implementation and interpretation of a scrap and failure oriented multi-objective optimization considering operational wear
Bode, Christoph (1);Goetz, Stefan (1);Schleich, Benjamin (2);Wartzack, Sandro (1) // 2023
The tolerancing of products for manufacturing is usually performed at the end of the design process and the responsibility of the designer. Although components are commonly tolerated to ensure ...
Implementation of a design guideline for aluminum foam sandwich based on industrial demands
Hommel, Patrick;
Roth, Daniel;
Binz, Hansgeorg;
Kreimeyer, Matthias // 2023
Aluminum foam sandwich (AFS) is an innovative material for lightweight structures, consisting of an aluminum foam core surrounded by two face sheets of aluminum. The advantages of AFS are a low ...
Instantiating a generic process model for early-stage Product-Service System (PSS) design in two capital goods manufacturing companies
Sarancic, David; Sánchez Díez, Andrea; Pigosso, Daniela C. A.; McAloone, Tim C. // 2023
Product-Service Systems (PSS) are seen as key enablers of circularity. However, better sustainability performance of PSS when compared to transactional business models is not given and it must be ...
Integrated Design Methodology: a proposal for a scientific research-based design process for stimuli-responsive products
Cano-Franco, Julieth Carolina; Álvarez-Láinez, Mónica Lucía // 2023
Complex global problems, such as sustainable crop production, where conventional products do not fully solve the problem due to their low efficacy and negative environmental impact, require ...
Investigating the process, design outputs and neurocognitive differences between prototyping activities with physical and digital Lego
McClenaghan, Adam;
Goudswaard, Mark;
Hicks, Ben // 2023
Design neurocognition is an emerging research area that can provide insights into the black box of designers’ cognitive processes. However, work to date has focused on neurocognition on its own, ...
Knowledge-driven Design for Additive Manufacturing: A framework for design adaptation
Schaechtl, Paul (1);Goetz, Stefan (1);Schleich, Benjamin (2);Wartzack, Sandro (1) // 2023
Due to the high freedom of design, additive manufacturing (AM) is increasingly substituting conventional manufacturing technology in several sectors. However, the knowledge and the awareness for the ...
Laying the foundations for a methodology to integrate and manage the Corporate Social Responsibility issues of a company in the Product Development Process
Capomaccio, Anne-Laure (1,2);Reyes Carrillo, Tatiana (1);Richet, Sophie (2) // 2023
Manufacturing companies are urged to take responsibility for their impacts on the environment and on society, to contribute to a more sustainable development. The concept of Corporate Social ...
Let Me Finish My Thought: Process Interventions to Change Team Behavior during Remote Design Collaboration
Domingo, Lawrence (1);
Leifer, Larry (1);
Auernhammer, Jan (2) // 2023
This research investigates changes in team behavior and communication through interruptions and gestures, due to design process strategies in pre-formed remote teams for conceptual design tasks. ...
LINKING A LAB ON PROTOTYPING FOR ENGINEERING STUDENTS WITH ITS ‘DIGITAL LEARNING ENVIRONMENT TWIN’
Riess, Christian; Walter, Michael S. J.; Tyroller, Maria // 2023
Students not always enjoy an in-depth practical learning experience with an adequate portion of hands-on during their academic education. In many fields of study, traditional laboratories are common ...
LONGITUDINAL EVALUATION OF SELF-ASSESSMENT AND PEER REVIEW IN A CAPSTONE COURSE
Törlind, Peter; Eklöf, Lars; Larsson, Lisa // 2023
This paper presents a longitudinal study over more than ten years with more than 500 students following the implementation and evaluation of peer review and self-assessment. By peer review, students ...
MANAGEMENT PRACTICES FOR SUSTAINABLE PRODUCT DEVELOPMENT: INSIGHTS FROM A SYSTEMATIC LITERATURE REVIEW
Vilochani, Sachira;
McAloone, Tim C.;
Pigosso, Daniela C. A. // 2023
Sustainable Product Development (SPD) has been gaining increased attention in academia, industry, and policy. Over the past three decades, significant progress has been observed in incorporation of ...
Mapping stakeholder engagement needs in early-stage system development process
Yip, Man Hang // 2023
Companies design, develop, and market new systems of products and services, through the process of translating beneficiaries’ needs into design specifications, where beneficiaries are those who ...
New Opportunities and Benefits in the Product Development Process using the Machine Learning based Direct Inverse Method for Material Parameter Identification
Meißner, Paul; Vietor, Thomas // 2023
Finite element (FE) simulations can be used both in the early product development phase to evaluate the performance of developed components as well as in later stages to verify the reliability of ...
New Product Development Process for MedTech Combination Products
Menshenin, Yaroslav; Pinquié, Romain; Chevrier, Pierre // 2023
The MedTech product development is experiencing a growing complexity of the design process. The design challenge is to keep the medical device simple and user-friendly while maintaining its ...
Observations on the Implications of Generative Design Tools on Design Process and Designer Behaviour
Saadi, Jana;
Yang, Maria // 2023
Developments in artificial intelligence (AI) are opening the possibilities for the development of more advanced design tools. An example of these innovations are generative design tools, in which the ...
On the treatment of requirements in DfAM: Three industrial use cases
Endress, Felix;
Rieser, Jasper;
Zimmermann, Markus // 2023
Optimization-driven design offers advantages over traditional experience-based mechanical design. As an example, topology optimization can be a powerful tool to generate body shapes for Additive ...
Ontology-based knowledge provision for decision support in product development
Jessica Pickel, Benjamin Gerschutz, Dennis Horber, Stefan Goetz, Sandro Wartzack // 2023
The product development process confronts engineers with numerous decision problems. In this context, it is a challenge to consider all underlying heterogeneous data sources and decision methods to ...
Operationalising concepts of digital twins on different maturity levels (foetal, child, adult) for the architectural design process
Emir Isik, Gülbahar; Hubertus Achten, Henri // 2023
A digital twin is the mapping of a physical twin between hybrid spaces. The lifecycle of digital and physical twins occurs through the concepts of foetal, child, and adult twins. This technology can ...
Optimisation of a design-to-fabrication framework for individualised homeless housing design in Melbourne, Australia.
Anam, Nadia Haquillah Deviana;
Tan, Linus // 2023
Digital design tools and technologies offer new opportunities for designers to generate a diverse range of design solutions. Previous research have discussed the multifaceted use of such technologies ...
Parametric Modelling of the Exterior Design of Autonomous Shuttles
Hafemann, Philipp;
Daumoser, Manuel;
Lienkamp, Markus // 2023
Autonomous vehicles for the last mile are a promising use case for advancing autonomous driving in real-world traffic. For this purpose, traditional car manufacturers and newcomer companies develop a ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.