Query returned 2056 results.
Integrated process and data model for applying scenario-technique in requirements engineering
Graessler, Iris; Scholle, Philipp; Pottebaum, Jens // 2017
Originating from strategic management, scenario-technique yields potentials for requirements engineering. In this paper an integrated process model for such an application of scenario-technique is ...
INTEGRATING A MULTIDISCIPLINARY DESIGN METHODS MINDSET INTO CLASSROOM PRACTICE
Stark, Camilla Gwendolyn; Howell, Bryan // 2017
Sanders and Stappers (2013) propose a new interpretation of design disciplines that is not delineated by traditional fields such as industrial design, graphic design, or architecture, but by themes ...
INTEGRATING EXPERT DESIGN REVIEWS IN PROJECT-BASED DESIGN COURSES TO ADDRESS MULTIPLE LEARNING GOALS
Benjamin, Stacy; Anderson, John // 2017
We present how conducting expert design reviews in an undergraduate, capstone design project course can address learning goals related to design, communication, and professionalism. In this course, ...
Integrating product development models and “in-product models”
Aßmann, Gert; Stetter, Ralf // 2017
Current complex products such as transportation systems usually dispose of an elaborate monitoring, control and diagnosis system. Very often such intelligent systems rely on models of the product ...
Integration of MBSE into existing development processes - Expectations and challenges
Kößler, Johannes; Paetzold, Kristin // 2017
The development of technical products is faced with an increasing amount of data of different domains. The communication between them is becoming more difficult. Additionally the dependencies between ...
INTERFERENCES OF INDUSTRIAL DESIGN AND ENGINEERING IN FUTURE DESIGN EDUCATION
Gärtner, Frank; Pietzsch, Martin; Frye, Annika // 2017
During the last years, the differences between industrial design and engineering design have become increasingly blurred. The two disciplines show interferences regarding their methods, problems and ...
Introducing constraints to enhance integration at the design-manufacturing interface of new product development
Bix, Susanne // 2017
Enhancing integration at the design-manufacturing interface in new product development is increasingly important for industrial players to keep up with shorter product lifecycles and innovative ...
Investigating usage data support in development processes - A case study
Höhn, Manuel; Hollauer, Christoph; Wilberg, Julian; Kammerl, Daniel; Mörtl, Markus; Omer, Mayada // 2017
The design of new product development processes which integrate customer perspective promises great potential regarding rising volatility of external influences, shorter product life cycles and ...
IS AUGMENTED REALITY A NEW PARADIGM IN DESIGN EDUCATION WHEN EDUCATIONAL SUBSIDY DECREASES?
Lai, Yoke-Chin // 2017
Augmented Reality (AR) has become a popular tool in education at all levels, ranging from the primary to the tertiary ones. Many AR tools seem to have been developed with the intention to facilitate ...
k-MORE - A methodology to manage documented knowledge for reuse
Carro Saavedra, Cristina; Lindemann, Udo // 2017
The reuse of documented knowledge still represents a challenge for engineering design companies. Most of the research and practice in knowledge management has focused on the systematic collection, ...
Knowledge based support for the designer at the interface of CAD/CAE
Andrae, Rene; Köhler, Peter // 2017
The extensive possibilities of modern CAD-software turn the classic approach into a more dynamic one. This opens up the possibility to take into consideration influences from the production and ...
Konzept zur zielgerichteten, ontologiebasierten Wiederverwendung von Pro-duktmodellen (Members only )
Philipp, Kestel; Thomas, Luft; Claudia, Schön; Patricia, Kügler; Thomas, Bayer; Benjamin, Schleich; Steffen, Staab; Sandro, Wartzack // 2017
The reuse of product and process models during the product development process leads to considerable savings of costs and time. Such models are available in digital form in data and knowledge bases. ...
LIGHT AND SHAPE: EXPLORING THE IMPACT OF LIGHT DURING THE PRODUCT DESIGN PROCESS
Skulberg, Harald // 2017
Industry’s increasing expectations for optimization within product design are clearly evidenced today. Designing physical objects for mass production involves a range of critical considerations. As ...
Material selection - A qualitative case study of five design consultancies
Asbjorn Sorensen, Charlotte; Warell, Anders; Jagtap, Santosh // 2017
suggest (a) that risk management has a major influence on the material selection process, (b) that negotiations of project boundaries in the ‘fuzzy’ pre-design phase has crucial influence on the risk ...
Mindfulness and resource-sensitive design: A literature overview and an agenda for research
Chan, Wing Mui Helen; de Bont, Cees // 2017
Mindfulness has aroused great interests in the past few decades and researches on mindfulness conducted have suggested that it is related to increase in awareness, creativity, quality ...
Modal shifts in concentration indicate creativity
Nguyen, Philon; Zeng, Yong // 2017
Modal shifts are said to indicate heightened creativity in the conceptual design process. These modal shifts are traditionally detected using concurrent verbal protocols. However, it is known that ...
Model based systems engineering (MBSE) approach for configurable product use-case scenarios in virtual environments
Mahboob, Atif; Weber, Christian; Husung, Stephan; Liebal, Andreas; Krömker, Heidi // 2017
Today, the designers have to deal with a great amount of uncertainties in the design process due to the lack of information about the product, its behaviour and the context in later life-phases ...
Modelling and simulating the effect of coordination on PD performance while handling change
Rajapaksha, Janaka; Mirkovic, Katja; Robinson, David; Wynn, David // 2017
Analysing effect of coordination on performance of complex Product Development (PD) processes and understanding impact of change within PD processes on performance have been recognised as pivotal in ...
Modelling the design parameters dynamics with Petri nets
Juranic, Jasmin; Pavkovic, Neven; Naumann, Thomas; Marjanovic, Dorian // 2017
The aim of the presented research is to develop methods and tools which would enable consistent dynamic updating and propagation of updated design information in teamwork in a manner that will not ...
MORPHOLOGY TO ILLUSTRATE THE MENTAL MODEL OF A DESIGN TEAM’S PROCESS
Zeiler, Wim // 2017
The need for nearly zero energy and environmentally sustainable buildings introduced further complexity in the design process of buildings. This calls for a holistic integral design approach with the ...
Navigating the common approaches to product development
Vance, Julia K.; Giambalvo, Jack; Hoffenson, Steven // 2017
Many design approaches are used and taught in industry and academia, and it is difficult even for seasoned design professionals to know which to use. These design approaches were developed in ...
Necessary extension of conventional idea processes by means of a method for the identification of radical product ideas
Herrmann, Thorsten; Binz, Hansgeorg; Roth, Daniel // 2017
The high failure rate of trials for implementing radical innovations underlines a demand for supporting the development process for new radical innovations. This demand has arisen in many companies ...
Parameter control assisting morphological product conceptualization of multi-technology-machine-tools
Schmid, Alexander; Jacobs, Georg; Löwer, Manuel; Katzwinkel, Tim; Schmidt, Walter; Siebrecht, Justus // 2017
Product conceptualization is an essential part of each product emergence process. A valid and context-sensitive selection and validation of appropriate product concepts in early stages of product ...
PASTEL AS A SWIFT SKETCH TOOL FOR DESIGN EDUCATION AND PRACTICE: A QUALITATIVE REVIEW
Hoftijzer, J. // 2017
Since the field of industrial design to a great extend concerns the creative development of three-dimensional objects, project communication is often a visual matter. The activity of design drawing ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.